MileStrong LCD Digital Signage Important Handling & Installation
Introduction
Please Follow These Guidelines
Proper handling and installation help protect the LCD panel and ensure safe operation. Please follow the guidelines below when unpacking, moving, installing, and connecting your display.
01 — Lift From the Sides
Always lift the display from both sides.
Do not press, push, or handle the LCD glass directly. Improper handling may damage the display panel.
02 — Never Stack Unpackaged Displays
Do not stack displays during installation or handling.
Keep displays properly supported and protected during installation to help prevent pressure or crushing damage to the LCD panel.
03 — Follow the Cable Connection Markings
Connect cables according to the labeled wiring sequence.
Make sure each cable is connected to the correct port before powering on the display.
Incorrect connections may cause short circuits or fire.
04 — Do Not Open the Display
Qualified personnel only.
The internal electronics should only be accessed by knowledgeable or qualified professionals.
Improper opening or servicing may cause product damage or injury.
Safe Handling Checklist
Before installation, please make sure:
☐ The display is lifted from both sides.
☐ The LCD glass is not pressed or touched during handling.
☐ Displays are not stacked during installation.
☐ All cables are connected according to the labeled sequence.
☐ The display is not opened by unauthorized personnel.
☐ The installation area provides adequate support for the display.
Need Installation Support?
If you have questions about installation, wiring, mounting, or product operation, please contact our support team before proceeding.
We're here to help you install your display safely and correctly.